Coronado springs bathroom fan

[buzz2001]

Are you in the tower or regular room? We just cover the fan sensor with a towel and/or hit the button o turn it of. It will reset after a while but the towel worked best

[MrsEgg]

The sensor is on the wall, underneath the light switch, you can press it to turn it off or we normally put a plaster or a post-in note over the sensor so it doesn't trigger, anything sticky to cover the sensor will do, it will stop it the fan coming on

[Donaldfan]

Originally Posted by disney332

Phone reception…just a thought.

Disney332

See more...

That's what I would have done. A 2 minute phone call and it could have been sorted.

[Donaldfan]

Originally Posted by Cookiepat

Thank you for the helpful/ kind replies, knew I could rely on this forum. I will go and find the switch.
If not I will then go and ask reception! 🙄

See more...

Suggesting you contact reception was being helpful. It was the obvious thing to do.

[kk20]

This is the offending article. we found it by accident. Its a sensor with a switch below.

if you look carefully at ours there is sticky tape residue at either side